Interdisciplinary all-on-four® concept for mandibular jaw in dental education - do students benefit from individual 3d printed models from real patient cases?

PURPOSE: Digitalization is assuming increasing significance in dental education, as dental students are increasingly exposed to digital implant planning and contemporary technologies such as 3D printing. In this study, we present a cohort analysis aimed at assessing the potential benefits derived from the utilization of 3D prints to seamlessly translate planned procedures into real-life applications. METHODS: 21 dental students participated in a virtual planning and hands-on course across two cohorts (C1: n = 10, C2: n = 11). The virtual implant planning phase involved the placement of four implants on an atrophic lower jaw model. Subsequently, Cohort 1 (C1) executed the implantation procedure on a prefabricated hands-on model, while Cohort 2 (C2) engaged with 3D prints representing their individual implant planning during the hands-on session. Subjective assessments of knowledge, skills, and the perceived utility of 3D prints were conducted through pre- and post-course questionnaires, utilizing a 5-point scale. RESULTS: In the subjective evaluation, 17 out of 21 participants expressed a positive appraisal of the use of personalized models. Notably, there was no statistically significant improvement in overall knowledge scores; however, there was a discernible increase of 0.5 points in the ratings related to perceived expertise and procedural abilities. CONCLUSION: While there was a notable increase in the subjective ratings of knowledge and abilities, no statistically significant difference was observed between the two groups. The consensus among dental students is that individually planned and printed implant models serve as a valuable and effective tool in hands-on courses.

Assessment and evaluation of online education and virtual simulation technology in dental education: a cross-sectional survey.

BACKGROUND: The global outbreak of coronavirus disease (COVID-19) has led medical universities in China to conduct online teaching. This study aimed to assess the effectiveness of a blended learning approach that combines online teaching and virtual reality technology in dental education and to evaluate the acceptance of the blended learning approach among dental teachers and students. METHODS: The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) checklist was followed in this study. A total of 157 students' perspectives on online and virtual reality technology education and 54 teachers' opinions on online teaching were collected via questionnaires. Additionally, 101 students in the 2015-year group received the traditional teaching method (TT group), while 97 students in the 2017-year group received blended learning combining online teaching and virtual reality technology (BL group). The graduation examination results of students in the two groups were compared. RESULTS: The questionnaire results showed that most students were satisfied with the online course and the virtual simulation platform teaching, while teachers held conservative and neutral attitudes toward online teaching. Although the theoretical score of the BL group on the final exam was greater than that of the TT group, there was no significant difference between the two groups (P = 0.805). The skill operation score of the BL group on the final exam was significantly lower than that of the TT group (P = 0.004). The overall score of the BL group was lower than that of the TT group (P = 0.018), but the difference was not statistically significant (P = 0.112). CONCLUSIONS: The blended learning approach combining online teaching and virtual reality technology plays a positive role in students' learning and is useful and effective in dental education.

3D-printed model for gingival flap surgery simulation: Development and pilot test.

INTRODUCTION: To assess the feasibility of a realistic model for learning oral flaps using 3D printing technology. MATERIALS AND METHODS: A mould was designed to reproduce the mandibular gingival mucosa, and a mandibular model was created using a three-dimensional printer for training undergraduate students to perform gingival flaps. After a short interview about its use, the participants were asked to use the simulator and provide feedback using a 5-point Likert questionnaire. RESULTS: The 3D-printed oral surgery flap training model was practical and inexpensive. The model was very realistic, educational and useful for hands-on training. CONCLUSIONS: 3D printing technology offers new possibilities for training in dental treatments that are currently difficult to replicate. The use of this simulator for oral flap surgery was well-received and considered promising by the participants.

Utilizing decision tree machine model to map dental students' preferred learning styles with suitable instructional strategies.

BACKGROUND: Growing demand for student-centered learning (SCL) has been observed in higher education settings including dentistry. However, application of SCL in dental education is limited. Hence, this study aimed to facilitate SCL application in dentistry utilising a decision tree machine learning (ML) technique to map dental students' preferred learning styles (LS) with suitable instructional strategies (IS) as a promising approach to develop an IS recommender tool for dental students. METHODS: A total of 255 dental students in Universiti Malaya completed the modified Index of Learning Styles (m-ILS) questionnaire containing 44 items which classified them into their respective LS. The collected data, referred to as dataset, was used in a decision tree supervised learning to automate the mapping of students' learning styles with the most suitable IS. The accuracy of the ML-empowered IS recommender tool was then evaluated. RESULTS: The application of a decision tree model in the automation process of the mapping between LS (input) and IS (target output) was able to instantly generate the list of suitable instructional strategies for each dental student. The IS recommender tool demonstrated perfect precision and recall for overall model accuracy, suggesting a good sensitivity and specificity in mapping LS with IS. CONCLUSION: The decision tree ML empowered IS recommender tool was proven to be accurate at matching dental students' learning styles with the relevant instructional strategies. This tool provides a workable path to planning student-centered lessons or modules that potentially will enhance the learning experience of the students.

O-Health-Edu: A viewpoint into the current state of oral health professional education in Europe: Part 2: Curriculum structure, facilities, staffing and quality assurance.

INTRODUCTION: Oral health professional (OHP) education is likely to vary across Europe in accordance with an EU directive that is open to broad interpretation. It is not clear how OHP curricula are structured or delivered across Europe. The objectives of Part 2 of this paper series are: (i) to provide an overview of common practices in curriculum structure, the availability of facilities, staffing (faculty) and quality assurance processes and (ii) to consider how the existing programme structures align to stakeholder guidance documents. METHODS: A total of 27 questions from a 91-item questionnaire were used for this manuscript. The questionnaire was developed following the Delphi method to establish consensus from a group of experts. Members of the research team and colleagues from other countries in Europe completed a multi-step piloting process. An online data hub was created to allow the respondents to be data controllers and respond to the questionnaire. ADEE member schools (n = 144) were invited to provide data. RESULTS: Totally, 71 institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Data on curriculum approaches, teaching methods, integration of topics of interest, clinical education, staff-student ratios, access to facilities and new technologies, teaching staff (faculty) and quality assurance processes are presented for Primary Dental Degree Programmes. CONCLUSION: To the best of our knowledge, this series of papers are the first attempts to provide a comprehensive overview of OHP education in Europe. Results showed that the majority of European dental programmes are engaged in providing innovative and scientifically grounded education in order to develop quality future OHPs. Nevertheless, significant variability in the delivery of clinical education across the European OHP schools was notable in this dataset. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

Assessment of an online tooth morphology course and 3D examination tool during the COVID-19 pandemic.

INTRODUCTION: The COVID-19 pandemic brought major disruptions to dental teaching and has impacted the delivery of tooth morphology courses where students are introduced to the three-dimensional features of the dentition. The aim of this study was to assess the implementation of newly developed online teaching modalities for tooth morphology, evaluate their usefulness and identify elements that are beneficial for learners. MATERIALS AND METHODS: Following the delivery of an online course that included online 3D models, 2D cue cards, live discussion sessions and Socrative™ quizzes, the participants were asked to rate the usability and usefulness of each tool. The participants' knowledge of tooth morphology was assessed through an online examination using 3D-digitised tooth models. RESULTS: The participants identified lecture handouts and online 3D models as their preferred learning tools, while lecture video recordings and 2D cue cards were viewed as less useful. Data analysis from Socrative™ quizzes demonstrated improvement in tooth identification skills throughout the course delivery. Finally, results from the final assessment are in line with previous in-person deliveries of this course. CONCLUSIONS: The study provides valuable information on the usefulness of teaching modalities that were implemented in response to the COVID-19 pandemic and their merit to be retained in future deliveries of the course. The 3D models have been identified as particularly useful in this context, but the participants still value the opportunity to learn with extracted teeth. Furthermore, it remains to be confirmed whether tooth identification skills acquired using 3D models can be transferred to the clinical setting.

Exam evaluation in prosthodontics across preclinical and clinical years from students' perspective: A cross-sectional study.

INTRODUCTION: The purpose of this study was to explore the students' perceptions and performance in prosthodontics theory exam. METHODS: A cross-sectional descriptive study was conducted on 560 (80.82%) students of different levels (third, fourth and fifth years) to explore their opinions and performance with regard to a number of issues on a prosthodontics theory exam (exam evaluation, exam preparation, exam material, exam timing). Demographic data were also collected. Descriptive statistics were generated and Chi-square test, independent sample t-test, ANOVA test and Pearson's correlation coefficient were used to examine the associations between different variables. The significance level was set at p < .05. RESULTS: Students' responses regarding exam evaluation was influenced by their gender, study level, high-school Grade Point Average (GPA) and undergraduate cumulative GPA. Perceived exam difficulty was significantly affected by gender (p = .03) and study level (p < .001), and negatively correlated to both high-school GPA (p < .001) and university GPA (p = .03). The vast majority (88.2%) depended on lecture hand-outs and lecture notes for study. Exam material and preparation were not significantly affected by any of the demographic variables with most respondents (76.8%) thinking that the lectures blended with prosthodontics laboratories/clinics would improve their understanding of the exam material. The suggested best time to conduct the exam was early afternoon (31.6%). Student performance was significantly affected by the study level (p < .001) and cumulative GPA (p < .001) with significant positive correlation between the high-school GPA and the mark in the exam (r = .29, p < .001) and by the amount of time students spent for exam preparation (p < .001). Those students who reported using textbooks to prepare for the exam got significantly higher marks (66.1 ± 8.7) compared to the students who did not (62.8 ± 9.7) (p = .03). CONCLUSIONS: Course level, GPA and gender were identified as the most influential factors in different aspects of exam evaluation and students' performance. Regular study and use of textbooks were demonstrated to improve academic performance. Additional orientation and guidance relating to the exam (especially for third year students) would be welcomed, as would alternate teaching methods such as small group discussions or study groups.

O-HEALTH-EDU: A viewpoint into the current state of Oral Health Professional education in Europe: Part 1: Programme-level data.

INTRODUCTION: Current legislation leaves Oral Health Professional (OHP) education open to wide interpretation and may result in significant variation in educational practice and resultant professional attributes across Europe. Data regarding the current state of OHP education across Europe is limited. The aim of Part 1 of this series is to provide programme-level data for Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education. METHODS: A 91-item questionnaire was developed following the Delphi method. The questionnaire and the Articulate glossary of OHP education terms were developed concurrently to facilitate a common understanding of language. Piloting was performed in multiple stages and included institutions internal and external to the research group. The questionnaire was uploaded online and converted to a data hub, allowing dental schools to control their own data and update the data provided whenever they wish. All ADEE member schools (n = 144) were invited to provide data. Forty questions relating to school details, Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education were included in this part of the series. RESULTS: Seventy-one institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Programme-level data for Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education is presented including programme length, funding, languages and fees, student numbers and demographics, student admission and selection processes and permission to practice after graduation. CONCLUSION: This series of papers, as far as the authors are aware, are the first attempts to build a comprehensive picture of the current state of OHP education in Europe. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

Setting the boundaries and scope of practice for the two sister specialities of dentistry: Operative dentistry-endodontics and prosthodontics.

Dental academia in Pakistan has recently achieved an important milestone. The name of Operative Dentistry speciality has been changed to Operative Dentistry & Endodontics (ODE). It was a much-needed change that was first felt about two decades ago. However, with the correction of name, there are certain challenges that this speciality has to manage now. These include improving the curriculum, setting up standards, and lastly, setting up its boundaries and scope of practice as some of its scope overlaps with a sister speciality called Prosthodontics. This overlapping of the boundaries of dental disciplines is a problem that is unique to Pakistan, India, and some East Asian countries where Operative Dentistry or Conservative Dentistry is combined with Endodontics. This paper aims to discuss the objective delineation of dental procedures and suggest a model of peaceful co-existence of sister dental specialities.

Students' perception of protective stabilization of pediatric dental patients: a qualitative study.

Protective stabilization (PS) has been utilized to safely perform examinations, make diagnoses and/or provide limited treatment of short duration to uncooperative children. The literature supports PS as an alternative technique when behavior management strategies are not sufficient to enable oral care. The use of PS in pediatric dentistry can be traumatic for patients, parents and the medical team and has sometimes been described as being non-compliant with standards of care. Semi-structured qualitative interviews on dental students' perception of PS were conducted in the pediatric department of dentistry at the University Hospital of Toulouse, France. A thematic analysis of the transcript of interviews was provided using the NViVo software. This analysis identified four main themes. The students described their first experience with physical restraint in pediatric dentistry and wondered about the definition of PS. The students' perception of PS showed that this procedure has a psychological impact and is disturbing. There is a lack of information on PS in dental curricula and didactic and clinical education which requires attention. Finally, the students took into consideration the role of PS in future practice. Dental students' perception of PS provides justification for the development and improvement of theoretical and clinical education in behavior guidance techniques for pediatric dental patients, in accordance with national and international guidelines.

The views of European students on the inclusion of research in undergraduate Oral Health Professional curricula.

INTRODUCTION: The education of Oral Health Professionals (OHPs) is variable across Europe and consequently, there is concern that research skills are not consistently or optimally integrated into European OHP curricula. The aim of this study is to investigate the perspectives of European OHP students regarding the inclusion of research in the undergraduate curriculum. MATERIALS AND METHODS: A 21-question online survey was administered to dental, dental hygiene, and dental hygiene and therapy students across Europe. Informed consent was obtained from participants and all responses remained confidential. Quantitative and qualitative methods were used to analyse the data. RESULTS: A total of 825 student responses to the survey from 33 European countries were eligible for inclusion. The results demonstrated that OHP students recognise the importance of research in the dental field and value the inclusion of research in the curriculum. Although students indicated that they are interested to learn more about research, the survey results also showed that students had neutral opinions towards the existing curriculum providing enough training about research. CONCLUSION: European OHP students agree on the need for an open and explicit research curriculum in OHP education. The development of a research domain within an open curriculum framework would help to harmonise the teaching and assessment of OHP research skills across Europe and ultimately improve graduating OHP's research skills.

Self-assessment skills of undergraduate dental students in the preclinical course of complete removable prosthodontics at Tehran University of Medical Sciences.

INTRODUCTION: This study evaluated the self-assessment skills of third-year dental students regarding their performance in complete removable prosthodontics (CRP) preclinical course. METHODS AND MATERIALS: This cross-sectional study was conducted on all third-year dental students attending the International Dental College of Tehran University of Medical Sciences. The students were requested to self-assess their performance in primary impression making, custom tray fabrication, border moulding, final impression making, master cast fabrication, record-base fabrication and tooth arrangement in CRP preclinical course. The performance of dental students in each step was scored by themselves and their mentors. Data were analysed by the Mann-Whitney U, Pearson's correlation and t-tests (α = 0.05). RESULTS: Totally 25 male (55.6%) and 20 female (44.4%) dental students were evaluated. Significant differences were noted between male and female dental students in self-assessment scores regarding adequate extension of the custom tray (p = .027), the correct position of tray handle (p = .020), visibility of vestibular width and depth on the cast (p = .011), the coincidence of upper and lower midlines (p = .005) and correct orientation of maxillary and mandibular planes in the articulator (p = .036). The mean self-assessment score of female students was significantly higher than that of male students (p = .01). The scores given by the mentors were not significantly different for male and female students (p = .975). The difference between the self-assessment score of students and the mentor score was not significant (p = .067) either in males or in females (p > .05). CONCLUSION: Undergraduate dental students favourably self-assessed their performance in all steps of the preclinical course of CRP, comparable with their mentor assessment.

Can self-assessment ability predict student performance in a dental anatomy course?

INTRODUCTION: The development of early self-assessment skills and determining its correlation with academic performance could provide evidence to alter dental curricula. The aim of this retrospective study was to examine the relationships between students' early self-assessment ability in waxing and three different evaluation methods (waxing assessment, written examinations, and tooth identification examination) in a dental anatomy course. MATERIALS AND METHODS: The dental anatomy scores during the academic years of 2018-2019 and 2019-2020 from two cohorts of second-year pre-doctoral dental students at the Harvard School of Dental Medicine were analyzed. Regression analyses were completed to assess the relationship between all evaluation methods. RESULTS: There was a statistically significant correlation between self-assessment ability and the waxing assessment but no significant correlation between self-assessment ability and the other evaluation methods. CONCLUSION: Our results showed that the introduction of self-assessments in dental anatomy waxing was correlated with successful waxing skills. Furthermore, a relevant finding is that students who received higher classifications were also capable of doing better self-assessments. These findings provide evidence that impacts dental curricula.

Exploring and describing current behavioral and social sciences curricula in predoctoral dental programs.

PURPOSE: To maintain accreditation status, predoctoral dental programs in the United States and Canada are required to train future dentists in the fundamentals of behavioral sciences. Each program independently determines how to fulfill this task, and little information exists on the consistency of training across programs. The purpose of this study was to identify the range of topics currently taught in predoctoral dental programs in the United States and Canada, who teaches them, and the modes of instruction and assessment. METHODS: Invitations to complete an online survey were emailed to faculty responsible for, or familiar with, the behavioral sciences curricula at 75 predoctoral dental programs in the United States and Canada. Questions elicited information on behavioral sciences education at each program, including instructor background, topics taught, instructional and assessment methods, and sources of content. RESULTS: Of those invited, 27 (36%) completed surveys. Per the responses, prototypical behavioral sciences programs usually consist of didactic/lecture format teaching, mostly during the first 2 years of the predoctoral program, by a dentist who assesses students using multiple-choice or true/false exams. The results indicated, however, substantial variation in what is taught, how it is taught, who teaches it, and how it is assessed. CONCLUSIONS: While being a requirement for accreditation, this study demonstrated how behavioral and social sciences topics, teaching strategies, and assessments, along with the individuals teaching those topics varied across predoctoral programs. Consistency, coordination, and clinical integration are possible ways of enhancing behavioral science instruction.

Thriving in foreign learning environments: The case of hands-on activities in early years of dental education.

OBJECTIVES: Hands-on learning environments can challenge learners' wellbeing in dental education, given their unfamiliarity with students. As today's learners are more aware about their wellbeing needs, it is important to explore the depth and complexity of the challenges they experience and provide them with the necessary support strategies. This study aims to identify the challenges and sources of cognitive overload of early years' dental students across two time-points: 2012 and 2022. We also aim to describe the students' recommendations for future program revision considerations to support students' wellbeing. METHODS: This study employs both qualitative and quantitative methods. Qualitatively, we utilized an Interpretive Description approach and conducted focus groups with first-year dental students in 2023. Quantitively, we utilized first-year dental students' responses to the Study Habits survey administered in 2012/2013. RESULTS: Five main concerns and sources of cognitive load emerged from the focus groups and survey data: steepness of the learning curve, inconsistent feedback, stigma around asking for support, structural and organizational challenges, and lack of resources. Students also identified several suggestions to support their wellbeing, including time, instructor support, non-graded exercises, additional resources, and re-organizing the curriculum. CONCLUSION: This study adopts a wellbeing lens to examine students' transition into hands-on learning activities. These findings were utilized to propose the TIPSS Support Framework (Time, Instructor Capacity Building, Peer Learning and Other Resources, Safe Learning Spaces, and Spiraling Curriculum). The proposed model can serve as a prototype for future studies to explore its applicability and effectiveness in other dental programs.

Assessment of a virtual prosthetic case planning environment for dental education - A multicentric analysis.

OBJECTIVES: The aim of the present study was the multicentric assessment of the virtual prosthetic case planning environment (VCPE), which relocates patient planning into the virtual space in dental education. MATERIALS AND METHODS: The VCPE is separated into two rooms: a virtual entry area where the user can choose between 10 different prosthetic case plans of ascending complexity, and a virtual patient case planning room. In spring term 2022, the use of virtual case planning was voluntarily assessed in four different German dental schools (DSs) from the perspective of both lecturers and students. The assessment was performed afterwards using a questionnaire. Data were analysed using Kolmogorov-Smirnov test, exploratory data analysis, Fisher-Freeman-Halton test, and exact Fisher test. Reliability was assessed with Cronbach Alpha test (α < 0.05). RESULTS: A total of 59 lecturers and 63 students were included. There were 38.5% male, 60.7% female, and 0.8% diverse participants. The mean age of the lecturers was 36.2 ± 9.0 years and of the students 24.3 ± 3.0 years. The VCPE was assessed as good, yet the evaluations between either the DSs or between the lecturers and students were significantly different. CONCLUSIONS: Even though for some assessment criteria significantly different results between the four DS were observed, the majority of participants evaluated the VCPE positively and recommended them for teaching. The virtual reality as a teaching method for teaching prosthetic case planning for the further preparation of the students for the later professional life can be considered as helpful.

Implementation of a communication curriculum in undergraduate dental education-students' opinions during a 5-year development phase.

INTRODUCTION: Communication training has become an essential part of the dental curriculum. The aim of this study was to evaluate the communication curriculum developed and introduced 2016-2021 at the University of Bern, School of Dental Medicine (SDM), Switzerland. MATERIALS AND METHODS: The curriculum was implemented cumulatively in three phases: (1) lectures and accompanying role plays, (2) forum theatre and trainer-based communication training and (3) self-assessment. Students were surveyed 2016-2021 at the end of each semester using anonymous online questionnaires with five-point Likert scales (0-4). RESULTS: A total of 191 fourth- and fifth-year students were surveyed, and 165 (86.4%) questionnaires were analysed. The mean age of the participants was 24.2 ± 1.4 and 45.5% were female. While students' opinions about the need to communicate increased during weekly lectures in phase 1, their opinions about their ability to communicate simultaneously decreased. During phase 2, fourth-year students' opinions on the need to communicate with dental patients increased from 3.22 ± 0.61 to 3.73 ± 0.45 (p = .001), anticipated benefits for dentists increased from 2.78 ± 0.71 to 3.43 ± 0.57 (p = .001) and for patients from 3.00 ± 0.76 to 3.47 ± 0.63 (p = .022). Only in phase 3, opinions on the ability to communicate statistically significantly increased for both fourth- (2.34 ± 0.71 to 2.72 ± 0.60, p = .033) and fifth-year (2.20 ± 0.63 to 2.86 ± 0.59, p = .001) students. Preferred teaching and assessment methods were trainer-based communication trainings (73.1%), lectures (67.3%) and self-assessments in the student clinic (59.6%). CONCLUSION: Communication curricula in dental education using methods such as lectures and trainer-based communication trainings may additionally need to include self-assessments to be effective from the students' perspective.

Assessment Of Problem-Based Learning In Dental Education And Exploring Barriers To Its Implementation: Theory To Reality.

There are 59 dental colleges in Pakistan out of which 17 are in the public sector and 42 in private. However, only a few use problem-based learning methods, though it is a popular strategy in dental education all around the world. This study aims to assess problem-based learning model in dental education and explore the barriers of its implementation in a private dental college of Karachi. Qualitative case-study approach was employed. The philosophical stance used was critical realism. Qualitative data was collected by participant observation, video recorded observation and video elicited semi-structured in-depth interviews of five faculty members and 15 students. Results showed that students were more interested in interactive sessions while faculty members were in favour of problem-based learning sessions. Thematic analysis was done to generate themes. This research applies reproduction method to explain the necessary and contingent relations and causal powers. Lack of motivation among students and lack of faculty dedication are causal mechanisms of barriers in the implementation of problem-based learning.

Virtual learning object about oral ulcerative lesions: controlled educational intervention study.

The aim of this study was to develop a virtual learning object (VLO) to teach undergraduate dental students about the diagnostic and therapeutic approaches to oral ulcerative lesions. The VLO was developed with information on the diagnostic process, lesion classification, and clinical-surgical management of oral ulcerative lesions. The VLO content was initially validated by a group of specialists. Learning was evaluated in a sample of 58 undergraduate dental students, divided into control group (conventional theoretical class, n = 29) and intervention group (interaction with VLO, n = 29). All students answered a pre-test and post-test questionnaire. The VLO group also answered a specific questionnaire on the evaluation of the VLO. Both quantitative and qualitative descriptive analyses were performed. The validation showed that professors and students considered the VLO adequate. The use of the VLO was recommended by 100% of professors and 86.6% of students. In the intervention group, the results showed a significantly higher number of correct answers in the post-test (p < 0.01). In conclusion, the VLO proved to be a useful tool for teaching oral medicine, contributing significantly to the knowledge of ulcerated lesions in the mouth.

Current Trends In Complete Denture Education In Undergraduate Dental Colleges Of Pakistan.

Objective: To determine the current trends in complete denture education in undergraduate dental colleges. METHODS: The survey-based study was conducted in April and May 2020 at undergraduate dental colleges of Pakistan, and comprised heads of the Prosthodontics Department at all dental colleges across Pakistan having at least one batch of final year dental students. Data was collected using an online predesigned questionnaire that explored theoretical and practical teaching patterns of complete denture prosthodontics in the undergraduate years, and the materials and practices of students when constructing complete dentures in the clinics. The participants were given the option of choosing more than one option where needed. Data was analysed using SPSS 23. RESULTS: Of the 49 subjects approached, 40(81.6%) returned the forms duly filled; 11(27.5%) from public-sector institutions and 29(72.5%) from the private sector. There were 26(65%) institutions which required that their undergraduate students fabricate 2-4 conventional complete dentures. In all 40(100%) colleges, faculty gave live clinical demonstrations before students fabricated conventional complete dentures in the outpatient departments. Teaching strategy included small group discussions in 25(62.5%) institutions. Green stick 40(100%), zinc oxide eugenol 40(100%) and impression compound 39(97.2%) were the materials of choice for various steps of impression making. In all the 40(100%) institutions, students fabricated conventional complete dentures during their prosthodontics rotation. Immediate, copy and overdentures were constructed by students in 8(20%), 3(7.5%) and 8(20%) institutions, respectively. Conclusion: Majority of the dental schools used similar impression materials and techniques for fabricating conventional complete dentures. Didactic teaching of conventional and unconventional complete dentures was being carried out at a huge majority of the dental institutions studied.